What Actually Kills, AC Or DC? Both alternating current and direct current are dangerous, but alternating current is considered more dangerous than direct current. This is because the human body has a higher impedance to direct current than alternating current, so the human body can withstand the impact Electric shocks caused by direct current are […]
Why Are Grounding Wires Not Insulated? Ground wires are not insulated because they are for safety purposes and are grounded in the circuit. ground wires do not conduct electricity under normal conditions. According to the NEC, ground wires must be exposed and, if you choose insulation, they must be green-yellow or green.
Why Do We Keep The Speed Of The Synchronous Generator Constant At No-Load? What Happens If The Speed Varies? Synchronous generators are constant-speed motors. They work at the synchronous speed of the power supply. They are commonly used for constant speed operation under idle conditions to improve power factor¹. When a synchronous generator is running,
How To Check Earth Resistance With Megger? How to measure ground resistance with a megger:
What’s The Difference Between Contactor And Relay? Contactors and relays are types of electrical switches that can control and switch loads. However, they have some differences in structure, functionality, and application. Here are some of the key differences between them: – The contactor is designed to switch high voltage and high current loads such as
What’s The Difference Between Contactor And Relay? Read More »
Why Is A Thermal Power Plant Not Suitable For Supplying A Fluctuating Load? Ground rods are generally installed vertically because ground conditions are more suitable for this orientation. Although it is possible to bury the ground rod horizontally, this is not advisable as it reduces the effectiveness of the ground system. Additionally, horizontal installation may
Why Is A Thermal Power Plant Not Suitable For Supplying A Fluctuating Load? Read More »
Can DC LEDs Run On AC? DC LEDs cannot be operated directly from the mains. DC voltage is required for operation. However, AC can be converted to DC using a rectifier or LED driver.
Can A Grounding Rod Be Buried Horizontally? Ground rods are generally installed vertically because ground conditions are more suitable for this orientation. Although it is possible to bury the ground rod horizontally, this is not advisable as it reduces the effectiveness of the ground system. Additionally, horizontal installation may not comply with local building codes
What Is NO And NC On A Contactor? NO and NC are abbreviations for Normally Open and Normally Closed, respectively. Used to describe the state of the contactor contacts when the coil is de-energized. The NO contacts are open when the coil is not powered and close when the coil is powered. The normally closed
How Can We Measure Resistivity Of Earth? There are different methods for measuring soil resistance. One of the most commonly used methods is the Four Tips Method. This method involves drilling four holes in the ground, approximately evenly spaced in a straight line. The diameter of the holes is not more than 10% of the
