Civil Tips

Material estimate for round water tank Rcc In this illustration we will calculate cement, sand, crushed stone, and of course steel for one tank’s certain water content. Here is today’s post we will discuss how to calculate the material quantity of an RCC round water tank. After reading this article, you will be able to […]

Civil engineer must know +18 Civil engineer tips and tricks 1- Break-in is not allowed for bars with a diameter greater than 36mm. 2- Maximum distance between seats is 1.00 m (or) 1 No per 1m2. 3- For rivets, a minimum diameter of 12 mm must be used. 4- Seats with bars with a minimum

The required septic tank size and all the details you want to know! The required septic tank size and all the details you want to know!A septic tank is an underground chamber of concrete, fiberglass or plastic through which domestic wastewater (wastewater) flows for basic treatment. The settling and anaerobic processes reduce solids and organic

Road Engineering Geometric Design Road Geometric Design is a branch of road engineering concerned with the positioning of the physical elements of the pavement in terms of standards and constraints. The fundamental goals of geometric design are to optimize efficiency and safety while minimizing cost and environmental damage. The geometric design also influences an emerging